Home
About Us
Our Products
Our Clients
Contact Us
Send Enquiry
Home Our Products - Real Elevator Products -Good Lifts

Real Elevator Products

Good Lifts

It is used extensively in factories and storage facilities for the movement of goods between floors. Two kinds of lifts are on offer – Drum-wound machine based or traction machine based. The capacities of this lift available at range from 250 Kgs to 10 Tons. Goods and workers can be transported to any number of floors. The size of the lifts can be from 3' x 2' to as large as 12' x 20'. Standard height of the cabin is 6' 71/2". The lift can open on the opposite side also (2 side open cabin).

 

Drum-wound type without counterweight – This lift is simpler in design and suited for low cost installations. The movement of the lift is based on the coiling and uncoiling of a wire rope on a rotating drum. A unique feature of our drum design is the provision of two ropes coiling separately on a right hand thread groove and a left hand thread groove. This leads to lesser rope stress and longer life. These lifts are quicker to install and require lesser space.

 

Traction type with counterweight – This lift is a better machine design wise and also offers greater safety to the user. This is achieved first through the use of 3 or more independent wire ropes stretched across the main traction sheave. Second, there being no positive coupling between the lift and the machine leads to greater safety as a slip is permitted whenever there is an obstruction to the lift travel. Unlike in the drum wound design there is no overload on the motor in case of lift overshooting at the top floor. Jerk free, smooth travel is possible by the usage of 2:1 roping. Though smoother, traction lifts travel at higher speeds than drum-wound lifts using the same power.

 

NOTES

  • Machine Room Height M – 2430 Overhead (0.7m/s speed) 'Op - 3950
  • Pit Depth 'P1 - 1650 Overhead (> 0.7 m/s speed)'O1 - 4600
  • Any number of floors can be served. The Side elevation shows only the Top Floor &
  • Bottom Floor for the respective height requirements..
  • All Door heights will be 2000 clear. Door Lintel Bottom should be at 2150 from FFL
  • Two-side open door is possible at ground floor at the same or different level.
  • Plan for Manual Swing doors / Telescopic doors are different.
  • All Sizes are inside finished dimensions in mm.
  • All Hoist-way walls are 230 mm thick Brick or 150 mm RCC walls.

 

 

CLIENT'S SCOPE

  • Entire Civil Structure for the lift shaft including plaster & painting of lift shaft inside.
  • Three Phase Electric Supply.
  • Scaffolding during Lift erection.
  • Provision of sill support, machine support, Lifting beam / hook, pit ladder, etc.
  • Grouting of our holdfasts, Push button Boxes, Door frame members, etc.
  • Machine room will be extended beyond the lift shaft so that machine is approachable from three sides for maintenance.

 

SIZE TABLE

Person

Car Inside
‘A’   x   ‘B’

Lift Shaft
One side open
‘C’   x   ‘D’

Lift Shaft
Tow side open
‘C’   x   ‘D’

Entrance
‘E’

Machine Room
‘K’   x    ‘L’

No.

Width x Length

Width x Length

Width x Length

Width

Width X Length

500

1100  x   1200

1600  x   1700

1780  x   1560

900

3000  x  3000

750

1300  x   1500

1800  x   2000

1980  x   1860

1000

3000  x  3000

1000

1400  x   1800

1900  x   2300

2100  x   2160

1100

3000  x  3000

1500

1700  x   2000

2500  x   2300

2400  x   2360

1350

3000  x  3000

2000

1700  x   2500

2500  x   2800

2400  x   2860

1350

3000  x  3000

2500

2000  x   3000

2800  x   2800

2750  x   2860

1500

3000  x  3000

3000

2500  x   3000

2800  x   3300

2800  x   3360

1500

4000  x  3000

4000

2500  x   3000

3300  x   3300

3300  x   3360

1700

4000  x  3000

5000

2500  x   3600

3300  x   3900

3300  x   3960

1700

4000  x  3600

Good cum passenger

request a quote

Freight Lift Diamond

request a quote
Home | About Us | Our Products | Our Clients | Contact Us | Send Enquiry